Kit Motore centrale Bafang 1000W 48V (68mm)

Bafang 8FUN Mid-Drive Motor for Pedal-Assisted Bicycles
Model: Can-bus 48V 1000W M615 MM G320.1000.C BBSHD
Bottom Bracket Size: 68 to 73 mm

Support Wheel Size (inches): 20 to 29

Rated Voltage (VDC): 48

Rated Power (W): 1000

Speed ??Limit (km/h): 52

Maximum Effective Torque (Nm): 160
Pedal Sensor: Cadence Sensor

Shaft Standard: JIS

Weight (kg): 5.6

Electronic Brake: Supported
Throttle: Supported

Tests and Certifications: IP X5/CE/EN 14764/ROHS

With a built-in speed sensor, this mid-drive motor, which is compatible with bicycles with standard bottom brackets, has a rated power of 1000W 160 Nm

It provides ideal power for pedal-assist bicycles on challenging trails. Lightweight yet strong and efficient, this motor significantly increases riding comfort and is suitable for touring and sporty bikes.

Bafang, with over a million motors produced annually, has established itself as the world leader in pedal-assist systems.

Battery cable: XT60 (same as UART) and a new battery communication cable.

If you use a BAFANG battery with communication and a BAFANG display, you can view other battery information via the display or the BAFANG GO+ app, such as battery temperature, total battery capacity, remaining battery capacity, number of cycles, discharge time, cell voltage, etc.
If you use other batteries, you can ignore the communication cable, as it cannot display other battery information (the experience is the same as with UART).
1T4 cable: Can-bus version.
The new thumb throttle can operate more precisely thanks to the new 1T4 cable. The harder you press, the greater the power assistance. At the same time, the speed limit on the display can be applied to both Throttle and PAS modes.
Speed ??Censor: Can-bus version.
The new controller can collect speed information more accurately and apply the data to the control program to improve power output. You'll enjoy smoother power.

Gear Sensor: Same as the UART version
Front and Rear Light: We've added the rear light cable for the bottom bracket. We no longer need to solder the rear light to the front light.
Bottom Bracket Size Measurement
As with the UART version, we've added the 73mm bolt package and spacers as options. If your bottom bracket width is less than 68mm, you may need to order additional bolts or spacers.
If you have any questions, please contact us.

For any information regarding compatibility or assembly, you can contact our technicians at 089790184 / 3206140014 (for questions/photos WhatsApp).