KT Control unit 36/48V 22A - 500/650W - with and without Hall sensors - standard connection

- This universal control unit has the ability to operate at two different voltages in fact, it can work both at 36v and at 48v and also has the particularity of being able to operate both with motors with hall sensors (the 5/6 small wires that come out from the motor) and with motors that are not equipped with hall sensors.

- This controller ONLY INTERFACE with KT displays and components.

- This universal control unit works with all brushless motors (without brushes) but hardly interfaces with the standard bike displays.

- It can be mounted on: E-Bikes, electric scooters, electric scooters, electric quads, scooters for the disabled. So on every electric vehicle that has a brushless motor (you can guess if the motor is brushless from the exit of three yellow, green and blue wires from the motor).

- We also recommend purchasing our universal display to make sure the controller works properly.
- Spinet lights

Measures:
LENGTH: 9.5cm
TOTAL LENGTH: 10.5cm
WIDTH: 6cm
HEIGHT: 3.5cm

Technical data:
MODEL: KT36/48ZWSRTD-XW02L
RATED VOLTAGE: DC36V/48V
RATED CURRENT: 11A
MAXIMUM CURRENT: 22A +- 1A
LOW VOLTAGE PROTECTION: DC30/40+ - 0.5V
SPEED SET: 1-4.2V

For any technical information on assembly and compatibility, the technicians are available to the number 3206140014 also with whatsapp message. Capobranco Project is not responsible for tampering or incorrect installations. The control units branded CAPOBRANCO use the best components to provide the best quality and reliability Our control units, assembled by specialized technicians, are tested at the end of the process production and before shipment. On the control units for electric bikes, scooters and electric scooters, the Capobranco Project guarantees 1 year warranty Our products are stocked and shipped from our headquarters in Italy.